0
Multiple Crash
Mission Requirements:
Dispel the bystanders from the lane!
Secure the scene of the accident!
Redirect the traffic on the highway!
Rescue all persons trapped in the wreckage of vehicles! (9) Transport all injured and dead persons to the hospital!
Needed Vehicles:
1 EKW Emergency Car(FGRL) with 1 Engineer(EG)
1 Patrol Car(STW) with 1 Policeman(PM)
1 Equipment Vehicle(RW) with 2 firefighters(FF) and 1 Fire Brigade
Diver(FBD)
1 Police Helicopter(PHC) with 1 Policeman(PM)
1 Salvage Vehicle(FGRR)
11 Rescue Transport Vehicle(RTW) with Rescue Medic(RM) and Emergency
Doctor(ED)
Mission Solution:
These steps need to be completed in a very certain order, which will be outlined here.
Send the FGRL, STW, PHC, FGRR and RW to scene first.
Deploy the FGRL to switch box located near the overhead stop sign and activate this switch.
Deploy the STW to just past that and place the PM in roadway and re-direct the traffic off the roadway.
Deploy the PHC to other side of freeway where there is a break in the guardrail. Deploy the PM and have him question the citizen standing there.
Check this periodically and question whoever else stops there.
Deploy the RW to just in front of the motor coach. Have the occupants exit vehicle. Have the 2 FF get Rescue Cutters from the RW and start extricating victims from the vehicles. Start with the motor coach. Look for the tire tracks going through the guardrail and send your FBD into the water there.
Send your FGRR to the grassy area inside the broken guardrail to retrieve the vehicle your diver will mark. Once it is placed on the highway dont forget to have a FF extricate the victim in vehicle.
Start deploying your RTWs where you need to while the vehicle is being pulled from the water. You can begin treating and transporting the victims.
Make sure you assign a RTW to the victim in the first red car you see (already extricated) or she will die.
By Ash
