Ga naar inhoud


Foto

Patch 3 Official Topic

Started by Hoppah , feb 05 2006 04:39
Emergency 3

  • Please log in to reply
163 replies to this topic

#101 Hoppah

Hoppah

    Boss cat

  • Administrators
  • 3879 Posts:
  • Gender:Male
  • Location:Special Needs Department

Gepost 17 december 2006 - 08:55

followed the readme, now i get error vbase71.dll missing? anyone got this file so i can put it in?

thanks


Where did you buy the game?
In the US? You don't need to install a patch then. :)

When you have the UK, French or German version you need to install v1.3.
Make sure you follow the readme step by step and I recommend you to make a backup of your game.
It worked for other people with the UK version, so it should work for you too.
When you still run into problems, reinstall Emergency 3 and try to install it again.

Good luck,

Hoppah

#102 Guest_foggy22_*

Guest_foggy22_*
  • Guests

Gepost 17 december 2006 - 08:58

Where did you buy the game?
In the US? You don't need to install a patch then. :)

When you have the UK, French or German version you need to install v1.3.
Make sure you follow the readme step by step and I recommend you to make a backup of your game.
It worked for other people with the UK version, so it should work for you too.
When you still run into problems, reinstall Emergency 3 and try to install it again.

Good luck,

Hoppah


I brought it from amazon.co.uk i will try what you suggested

Thanks

#103 Guest_foggy22_*

Guest_foggy22_*
  • Guests

Gepost 17 december 2006 - 10:00

When i run the setup file i get the following come up saying

Bitte Disk 1 einlegen, welche die Datei optgraph.dll enthalt

however when pressing ok i get the following error message

Im angegebenen Pfad bzw. auf der angegebenen Diskette konnte eine Datei nicht gefunden werden.
Bitte uberprufen Sie, ob die richtige Diskette eingelegt ist, oder geben Sie einen neuen Pfad an.

An help would be appreciated.

Thanks

When i run the setup file i get the following come up saying

Bitte Disk 1 einlegen, welche die Datei optgraph.dll enthalt

however when pressing ok i get the following error message

Im angegebenen Pfad bzw. auf der angegebenen Diskette konnte eine Datei nicht gefunden werden.
Bitte uberprufen Sie, ob die richtige Diskette eingelegt ist, oder geben Sie einen neuen Pfad an.

An help would be appreciated.

Thanks


Sorted that part but where do i find the em3.cfg file

When i run the setup file i get the following come up saying

Bitte Disk 1 einlegen, welche die Datei optgraph.dll enthalt

however when pressing ok i get the following error message

Im angegebenen Pfad bzw. auf der angegebenen Diskette konnte eine Datei nicht gefunden werden.
Bitte uberprufen Sie, ob die richtige Diskette eingelegt ist, oder geben Sie einen neuen Pfad an.

An help would be appreciated.

Thanks
Sorted that part but where do i find the em3.cfg file


Sorted no longer need any help

#104 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 17 december 2006 - 10:55

Okey, so it works now? Not missing vbase71.dll ? If your still let me know i'll uplaod it ;)
Webmaster & Technical Support

#105 Guest_foggy22_*

Guest_foggy22_*
  • Guests

Gepost 18 december 2006 - 08:59

Okey, so it works now? Not missing vbase71.dll ? If your still let me know i'll uplaod it ;)


No i have managed to get it working

Thanks for the help

#106 Coderedpl

Coderedpl

    Firefighter

  • Members
  • 14 Posts:

Gepost 24 december 2006 - 11:12

Does anybody have the list of fixes for it?

#107 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 25 december 2006 - 12:58

*Separate blue light beams for simpler vehiclemodding.
*Support of Childobjects in vehicles
*Produce and administer expansion around numerous useful scriptingcommands, for example GUI-elements of the script out of
*Restrictions of the camera (zoom, view angle) per script changeable
*Commandicons can be used out of the Mod-file
*in Mod-activation, more parameters reinitialisiert become
*a siren can be added to the TEC


and some script things that are needed for mods, ie la mod and so on...

and here the changelsit of patch 1 & 2

-Fixed graphic problems with night missions
-Front lights will go out in same time with the head lights
-Problems fixed with some game controlers
-Persons will now move faster when game goes faster
-Some options in editor are changed
-Small errors in MOD system are fixed
-A warning will appear if there is something wrong with a mod
-An error will appear if critical game files changed
-Fixes some problems with some graphic cards
-Added a MOD installer


Webmaster & Technical Support

#108 ShaneGreen

ShaneGreen

    Captain

  • Members
  • 230 Posts:
  • Gender:Male
  • Location:New South Wales, Australia

Gepost 08 april 2007 - 04:55

I have the UK version of Emergency 3 with a clean install and patched up to 1.02EN which seems to run normally. I have attempted to install 1.03EN patch onto my system running Microsoft Vista so that I can install the mods. After running TNT-fix I then run setup. After setup begins to run I recieve the following message from the Installshield wizard. "Emergency 3 ist nicht installiert. Die installation wird abgebrochen." After selecting OK to acknowledge the message, the setup program terminates. I have not had any problem loading onto my earlier system running Windows XP. Any suggestions ?
Thanks and Happy Easter!
PARAMEDICS " Our day begins, when yours is about to end "

#109 Guest_Gamesfunk_*

Guest_Gamesfunk_*
  • Guests

Gepost 08 april 2007 - 10:24

Well, if you have run the TNT-fix batch, you should not be able to get your error message. Are you sure you pressed OK when asked to add data to the registry?

G.

#110 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 08 april 2007 - 11:27

Well, if you have run the TNT-fix batch, you should not be able to get your error message. Are you sure you pressed OK when asked to add data to the registry?

G.


Well it could be a Vista issue
Webmaster & Technical Support

#111 Guest_Gamesfunk_*

Guest_Gamesfunk_*
  • Guests

Gepost 08 april 2007 - 12:53

Didn't I add that? Oh well, I suppose it could also be Vista, you're right about that.

G.

#112 ShaneGreen

ShaneGreen

    Captain

  • Members
  • 230 Posts:
  • Gender:Male
  • Location:New South Wales, Australia

Gepost 09 april 2007 - 07:43

Well, if you have run the TNT-fix batch, you should not be able to get your error message. Are you sure you pressed OK when asked to add data to the registry?

G.


Tried again. Ran the TNT-fix which completed successfully. After which I ran setup for 1.03EN but still recieved the error message. I suppose it must be an issue with Vista. Has anyone managed to successfully install and run 1.03EN patch on a system with Microsoft Vista? If so please let me know.

Thanks
Shane
PARAMEDICS " Our day begins, when yours is about to end "

#113 pyrothijs

pyrothijs

    Assistant Chief

  • Members
  • 2472 Posts:
  • Gender:Male
  • Location:Lelystad, the Netherlands
  • Interests:Everything that has to do with the Fire Department.

Gepost 07 mei 2007 - 05:17

Ive reinstalled the LA mod, but i get excited that it all might be working, i go through the start up scene and then i go sad it all stops at the main menu , i have two arrows the games arrow doesnt work and the other one can not access anything makes me sad, I really want to play with the LA Mod and i so need helo :(
I think ill remove all files related to EM3 and install it again and see what it has in its directory.
I bought EM3 from ebay and i think it comes from america but not sure!
and ill keep trying ill never give up.... ! i want em3 to work with some mods attached so i can enjoy the game :)


I think you already figured it out but for anyone else who has this problem:
if the games starts and you see two arrwos (one game arrow and one normal arrow) you should press CTRL + ESC (together), you will return to your desktop. In the lower bottom off the dektop screen you see an Emergency 3 logo meaning this program is still running. When you click this beam the game will pop up and you're mouse should function normal again.

greetz
Thijs

greetz,PyroThijs, (Moderator/FAQ author)
See something that doesn't belong? Report it, don't take matters into your own hands.
Posted Image
Posted Image
Posted Image

#114 Guest_Gargantou_*

Guest_Gargantou_*
  • Guests

Gepost 28 juni 2007 - 01:53

Hello, I have UK version of the game, I download the 1.03 english update from this site, and try to run the TNT fix, it doesnt work, it pops up as a text file, I even tried rightclicking and "Input into registry", still doesnt work.
I then took the liberty to download the TNT version in itself of the supposed fix, it looks quite different from the one on this site, with some more registry additions. Can anyone help me? And I -HAVE- tried installing without the TNT fix and it just gives me some crappy shit about how Emergency 3 isnt installed on the computer, I've also tried manually adding the registry edits that I see in the file when it opens up as a text file, still doesnt work, any help would be highly appreciated!

#115 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 28 juni 2007 - 02:08

On Windows Vista?
Webmaster & Technical Support

#116 Guest_Gargantou_*

Guest_Gargantou_*
  • Guests

Gepost 28 juni 2007 - 02:33

Nope, Windows XP SP2.

#117 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 28 juni 2007 - 08:45

Nope, Windows XP SP2.


Im reuploading a fix, maybe this one works :)

I updated the readme a bit and added a dutch readme for those that don't udnerstand english here
Webmaster & Technical Support

#118 Guest_Gargantou_*

Guest_Gargantou_*
  • Guests

Gepost 28 juni 2007 - 10:23

Sadly doesnt work for me, I cant seem to use the TNTfix.reg file, I tried manually writing what was in it into registry, I try running both seperate exes, still doesnt work.:(

#119 Guest_Norwegian-EM3_*

Guest_Norwegian-EM3_*
  • Guests

Gepost 10 juli 2007 - 07:41

I HAVE DECLARED EMERGENCY TO MY SELF ABOUT ALL ENGLISH PATCHES.....
:laugh:

Bcause this message comes up when trying to enter the site that hoppah says that im going to enter:
URL is outdated... :stupid:


:ph34r:

#120 Stan

Stan

    Webmaster

  • Webmaster
  • 6911 Posts:
  • Gender:Male
  • Location:Vaals - Nederland

Gepost 13 juli 2007 - 03:59

http://downloads.eme...e...=view&id=31

there
Webmaster & Technical Support
Back to General Help



Also tagged with one or more of these keywords: Emergency 3

  1. International Emergency & 911: First Responders Fan Forum
  2. → Other Emergency games
  3. → General Help
  4. Privacy Policy
  5. Forum Rules ·