61 replies to this topic

[Gamage]

I'm new to the forum but had this game for a while as well as read a lot on the forums. I decided to help you guys out with things that I figured out that I believe some of you still have trouble with.
And just in case I apologize if anything was mentioned or if this is under the wrong category.

Important!: If you want to try this you MUST have NVIDIA drivers.

Performance Fix

Ok to start off I noticed a few people have trouble with lag/slowdown when multiple units are selected.
I had this problem myself and turned off PhysX. This improved my performance by a lot.

To do this turn on the NVIDIA Control Panel by right clicking and selecting "NVIDIA Control Panel"
 1.jpg   52,69K   368 Aantal downloads
Once it's open it should look something like this...
 2.jpg   204,81K   499 Aantal downloads
Then click on "Set PhysX configuration"
 3.jpg   116,26K   501 Aantal downloads
Once on the page click "Disable" and then apply your settings.
 4.jpg   126,19K   450 Aantal downloads

Slight Graphics Fix

Now for a few graphics improvements using the Nvidia Control Panel
These allow you to max out the games "Default" graphics and allow the NVIDIA Control Panel to make those graphics look even better such as adding AA among others.

Repeat the above steps to simply open the NVIDIA Control Panel

Then click on "Standard" and a drop down menu should appear.
 2.1.jpg   181,61K   334 Aantal downloads
Click on "Advanced"
 2.2.jpg   177,83K   254 Aantal downloads
Then click on "Manage 3D Settings"
 2.4.jpg   183,05K   219 Aantal downloads
Click on "Program Settings"
 2.5.jpg   188,84K   245 Aantal downloads
Now click on the drop down box labeled as 1 and find "Emergency 4" which is labeled as 2.
 2.67.jpg   214,15K   279 Aantal downloads
These are the default settings
 2.8.jpg   211,68K   361 Aantal downloads
And here are the settings you need to have in order to use the NVIDIA Control Panel to it's full potential (NOTE: If your game becomes slow because your computer can't handle it but you still want superior graphics only lower "Anisotropic Filtering", "Antialiasing - Settings", and the "Antialiasing - Transparency")
 2.81.jpg   198,63K   427 Aantal downloads
Here is the lower portion of the settings once again to use the Control Panel to it's full potention (NOTE: Out of these settings you can lower everything or turn them off if your computer can't handle it)
 454644.jpg   239,78K   362 Aantal downloads
Don't forget to click apply
 fdgdxhdrhtrdcxh.jpg   200,27K   233 Aantal downloads


Also if at any point you want to put all the settings back to their original settings just click restore.
 cheese.jpg   208,01K   187 Aantal downloads

Resolution Tweak

Here is a Resolution fix I was promising all day

Open up "My Computer" and go to Drive (C:)
 2.jpg   152,44K   142 Aantal downloads

Open up "Program Files (x86)"
 3.jpg   168,87K   158 Aantal downloads

Find a folder called "Wizard Works"
 5.jpg   223K   173 Aantal downloads

Find a file called em4 or em4deluxe (You will only have one of these)
 8___12.jpg   152,32K   199 Aantal downloads

Copy and past it in case you make a mistake.
 9.jpg   180,62K   222 Aantal downloads

Right click and select "Open with..."
 13.jpg   177,45K   178 Aantal downloads

Select "Notepad" (or if you have it "Notepad2"thanks to Xplorer4x4 for bringing this up)
 14.jpg   205,14K   154 Aantal downloads

A file with lot's of gibberish should pop up
 15.jpg   103,65K   135 Aantal downloads

Press Ctrl+F. Find should pop up
 16.jpg   123,44K   151 Aantal downloads

Type in xres and click find next.
 17.jpg   229,27K   158 Aantal downloads

Find the two values of xres and yres
 19.jpg   229,39K   333 Aantal downloads

Change the numbers to your resolution (mine is 1920 by 1200)
 20.jpg   217,94K   202 Aantal downloads

Save and your done!
 21.jpg   208,23K   160 Aantal downloads

The copy was made as a backup in case you make a mistake or it wont start. You can just copy it back to retry or just leave it and not mess with it any more.

Camera fix can be found in the L.A. MOD FAQ

If you have any problems just post it here or PM me.

I will also be making a tutorial for ATI soon (im getting an HD 5870).

Have fun!

[Gamage]

Glad it helped a little at least. For me it was actually a larger performance boost and the graphics were moderatly better but that could be because the jagged edges annoyed me a lot more.
I'll probably post graphic comparison pics a little later.

[mutu]

I tried disable the SetPhysx and it worked! But I didn't get much result from the other stuff. I have a question. My game runs perfect when playing normally. But when I record the game the frame rate drops by 10-20 FPS. Any ways to prevent that from happening? I messed around a little in the Nvidia control panel, but I'm not sure what I'm doing

[Gamage]

I tried disable the SetPhysx and it worked! But I didn't get much result from the other stuff. I have a question. My game runs perfect when playing normally. But when I record the game the frame rate drops by 10-20 FPS. Any ways to prevent that from happening? I messed around a little in the Nvidia control panel, but I'm not sure what I'm doing

What do you use to record?

This did improve my performance a considerable amount.
Thanks for taking the time to write this!

No problem. Glad I could help.
To be honest I thought no one would really care about this post.

[Stan]

Welcome to the forums ,

A very informative post, do you mind if I stick it?

[Hoppah]

Thanks! It can be really helpful for some people I think. I will try it too, to see if it boosts performance in FPS.

[Gamage]

Welcome to the forums ,

A very informative post, do you mind if I stick it?

Of course not.

[Hoppah]

How did found this out? I mean, there are a ton of things you can try to see if it helps, so how did you end up in the NVIDIA control panel?

[Gamage]

To be honest I just had a small hunch about the PhysX.
The slight graphics I found out by noticing the the options that were available but in particular the "Override any application setting"

Oh and now I'm looking for a way to increase the resolution. I have already found the file I need to modify but am going to test this out before I post anything.

[Hoppah]

To be honest I just had a small hunch about the PhysX.
The slight graphics I found out by noticing the the options that were available but in particular the "Override any application setting"

Oh and now I'm looking for a way to increase the resolution. I have already found the file I need to modify but am going to test this out before I post anything.

You can edit the em4.cfg (or em4deluxe.cfg) config file to change the resolution to anything you want.

[Gamage]

Thanks I'm just experimenting with higher resolutions.

Edit: I successfully got the game working full screen on my 1920 by 1200 monitor.
I only need to make a few adjustments to the camera.

I'll be making a tutorial soon that will show you how to increase your resolution if it is not supported by the game.

[Gamage]

 Graphics_comparison_fix.jpg   659,8K   338 Aantal downloads
Here's the nice comparison I promised.
The left side is with the slight fix while the right side is just standard.
BTW Good job on the Audi Hoppah
NOTE:This image is slightly distorted. You may be able to see the difference or you may not. I higher quality one will be re-posted.

[Forensics]

Here's the nice comparison I promised.
The left side is with the slight fix while the right side is just standard.

I can't see any difference.

[randomperson139]

I can see a slight difference if I make the pic full size.

[Gamage]

Like I said it's a slight difference.
It will be more noticeable on higher resolutions which I will be making a tutorial for soon.

[Forensics]

I see no difference, no matter what the size is...